Customizing a better life can’t be lost in this place

"Customized Home Furnishing" is better than finished furniture for its personalized characteristics, so more and more consumers choose it, and more and more practitioners see the market, and the customized home furnishing industry will also focus more on it. In terms of design, in fact, in addition to designs with different styles, the most important thing for custom home furnishings is to choose furniture materials.

The wrong design style is just a problem of "a little bit ugly". If the board is not selected correctly, it will face the problems of "safety" and "durability". The quality of the board is a problem for ordinary consumers. , It is difficult to distinguish in a short period of time. If you spend time, energy and money on decorating a home, it would be a shame if there are problems that threaten your family’s physical and mental health.

So how should we look at the board problem?

One: the type of sheet

1. MDF/Fiberboard

Density board

The full name of density board is density fiberboard, which is made of wood fiber or other plant fiber as raw material, prepared by fiber, applied synthetic resin, and pressed under heating and pressure conditions. According to its density, it can be divided into high density fiberboard, medium density fiberboard and low density fiberboard. The density board has a uniform structure, fine material, stable performance, impact resistance, easy processing, and a wide range of uses, but it has general waterproofness, limited load, large amount of glue, and low environmental protection factor.

2. Particle board

Particle board

Particle board is a wood-based panel made of wood or wooden poles and logs, with fine wood fibers on both sides and long wood fibers in the middle. After applying an adhesive, it is glued under the action of heat and pressure. The surface of the panel is melamine veneer. The cross-section presents a honeycomb-shaped sheet. The particle board has stable structure, strong load-bearing performance, strong bending resistance, small amount of glue, and high environmental protection coefficient, so it is widely used by high-end furniture manufacturers.

However, due to the particle structure, the waterproof and moisture-proof performance is poor, and it is easy to expand and crack when exposed to moisture. The craftsmanship requirements are also relatively high and need to be built in a professional environment.

3. Solid wood board

Solid wood board

Solid wood panels are wood panels made of complete wood (logs). Solid wood boards are durable and have natural textures. Most of them have the unique fragrance of natural wood, have good moisture absorption and air permeability, are good for human health, and do not cause environmental pollution. They are high-quality boards for making high-end furniture and decorating houses.

Because it is made of solid wood, it needs to be carefully maintained. It cannot be exposed to the sun for a long time or placed in an excessively humid environment. It needs careful daily maintenance.

4. Reed board

Reed board

Reed board is an artificial board made of reed as the main raw material, after crushing, drying, polishing, screening, applying formaldehyde-free MDI glue, and making it through high temperature and high pressure. It has no formaldehyde, no irritating smell, good moisture resistance and excellent stability. , Noise isolation, high hardness, durability and other characteristics, it is a relatively environmentally friendly furniture board, but the material is novel, the cost is high, there are not many merchants, and there are not many choices.

5. Bamboo incense board

Bamboo incense board

Bamboo fragrant board is an environmentally-friendly board customized by Dinggu Whole House in 2017. Bamboo fragrant board is made of bamboo as raw material. After bamboo fiber is pressed into the board, the texture is tough, wear-resistant and pressure-resistant. Due to the characteristics of bamboo, the bamboo fragrant board has high density, high hardness, strong toughness, is not easy to grow insects, is damp, has good performance in removing aldehydes and odor, and has a high environmental protection coefficient. But again, it belongs to the new generation of sheet metal, which has high cost, not many merchants and household heads with sufficient budget.

Two: the selection of plates

There are different types of plates, good and bad products, so when choosing plates, we can choose from the following aspects.

1. The environmental protection coefficient, the environmental protection coefficient of the board and the environmental protection certificate are the most intuitive indicators to understand its environmental protection. It is also related to the amount of formaldehyde released from the board. At present, the most environmentally friendly index on the market is E0 grade, and the formaldehyde content is ≤0.5mg/l.

2. Static bending strength. The static bending strength is related to whether the furniture will be deformed in long-term use. The higher the index, the stronger the destructive resistance of the furniture.

3. Wood nail holding power. Nail holding power refers to whether the nail is easy to fix the nail hole and whether it is easy to loosen and fall off after the nail enters the board. Plates with good nail holding power generally have relatively high hardness, strength, and density, and are not easily deformed.

4. Water swelling rate. The water-absorbing expansion rate is related to whether the furniture has waterproof and moisture-proof performance. The lower the water-absorbing expansion rate, the better the waterproof performance, and it will not be easy to crack and deform in a humid environment.

The base material of custom furniture is directly related to future life. Residents want to live in a safe and comfortable environment, so you must polish your eyes during the decoration process, choose the right base material, and choose the right custom home!


Mining Dump Trucks are Off-highway dump trucks, which are used to transport coal and sand in non-highway field sites, such as large open-pit mines and water conservancy projects. In civil engineering, it is often combined with excavators, loaders, belt conveyors and other construction machinery to form a loading, transportation, and unloading production line to carry out the loading, unloading and transportation of earth, sand, and bulk materials.

Mining Truck

Mining Truck,Massive Mining Truck,Mining Dump Truck,Electrified Mining Truck

NORTH HEAVY GRYPS EQUIPMENT AND ENGINEERING CO.,LTD , https://www.nhgtunnel.com

Posted on